Assembly; Introduction; Tools Needed - Huffy Slider Owner's Manual

• Assembly

Introduction

It is important to read this entire manual before beginning assembly.
If the unit has any parts that are not described in this manual, look for separate "Spe-
cial Instructions" that are supplied with the product.
Do not dispose of the carton and packaging until you complete the assembly of the
unit. This can prevent accidentally discarding parts of the product.
WARNING: Keep small parts away from children during assembly.
NOTE: All of the directions (right, left, front, rear, etc.) in this manual are as seen by
the rider while seated on the unit.

Tools Needed

Small Adjustable Wrench Open-end Wrenches
(Jaws must open at least 9/16 inch.)
Flat-blade Screwdriver Phillips Screwdriver
Slip-Joint Pliers Metric Allen Wrenches
5