Huffy Coaster Owner's Manual page 13

Seat Installation - continued
WARNING: If the clamping force of the Quick Release Lever is too light, the seat
post can loosen while riding. This can cause injury to the rider or to others.
Tighten the quick release lever (fi g C):
1. Open and close the Quick Release Lever with one hand while you turn the Adjust-
ing Nut H with the other hand.
2. Tighten or loosen the adjusting nut by hand, so that you fi rst feel resistance to the
quick release lever when it perpendicular to the bicycle frame.
3. Push the Quick Release Lever to the "close" position.
4. When in the "close" position, make sure the Quick Release Lever lays against the
Seat Post Clamp
5. The tightening torque of the Quick Release Lever should be tight enough so that
the seat does not move during normal operation.
Seat Bolt Mount (various models)
Some models have a Bolt
, Washer and Nut
I J
instead of a Quick Release
Lever.
• If needed, loosen the nut
enough to insert the Seat
Post E .
• Point the seat forward and
insert Seat Post to the
Minimum Insertion marks
.
B
• Tighten Nut securely so it
supports the rider without
moving. See torque table for recommended torque.
.
G
B
K
C
I
E K
J
g D
13