Support And Contact Info - Honeywell XYR 6000 User Manual

This document describes preparation, operation and maintenance of the WCX Series Valve Position Sensor and
antennas. Mounting and installation are covered in other documents.
Honeywell does not recommend using devices for critical control where there is a single point of failure or where
single points of failure result in unsafe conditions. OneWireless is targeted at open loop control, supervisory
control, and controls that do not have environmental or safety consequences. As with any process control solution,
the end-user must weigh the risks and benefits to determine if the products used are the right match for the
application based on security, safety, and performance. Additionally, it is up to the end-user to ensure that the
control strategy sheds to a safe operating condition if any crucial segment of the control solution fails.
Revision Information
Document Name
XYR 6000 Wireless Valve Position Sensor,
Model WCX Series User's Manual
References
The following list identifies all documents that may be sources of reference for material discussed in this
publication.
XYR 6000 Wireless Valve Position Sensor, Model WCX Series Quick Start Guide
Getting Started with Honeywell OneWireless Solutions
OneWireless Wireless Builder User's Guide
OneWireless Builder Parameter Reference

Support and contact info

WARNING
Risk of death or serious injury from explosion or fire.
If sensor is to be returned to Honeywell for any reason, both batteries MUST
be removed prior to shipping. Dispose of used batteries promptly per local
regulations or the battery manufacturer's recommendations. Keep away from
children. Do not disassemble and do not dispose of in fire.
Revision 1 OneWireless XYR 6000 Wireless Valve Position Sensor User's Manual
1/15/09
About This Document
Document ID
50040849
Document Title
Revision Publication
Number Date
1 1/15/09
iii