216
4-3. Operating the lights and wipers
Headlight switch
The headlights can be operated manually or automatically.
Operating instructions
Turning the end of the lever turns on the lights as follows:
The side marker, parking, tail,
1
license plate, instrument panel
lights, and daytime running
lights (→P. 217) turn on.
The headlights and all lights
2
listed above (except daytime
running lights) turn on.
The headlights, daytime run-
3
ning lights (→P. 217) and all
the lights listed above turn on
and off automatically.
(When the engine switch is in
IGNITION ON mode.)
Off
4
(U.S.A.)
The daytime running lights
turn on. (→P. 217)
(Canada)
Turning on the high beam headlights
With the headlights on, push the
1
lever away from you to turn on the
high beams.
Pull the lever toward you to the center
position to turn the high beams off.
Pull the lever toward you and release
2
it to flash the high beams once.
You can flash the high beams with the
headlights on or off.
GS350_300_GS F_OM_OM30G34U_(U)
U.S.A. Canada