Lexus GS350 Owner's Manual page 493

Check the specified tire inflation
9
pressure.
Tire inflation pressure is specified on the
label as shown. (→P. 528)
Start the engine. (→P. 197)
10
To inject the sealant and inflate the
11
tire, turn the compressor switch on.
Inflate the tire until the recom-
12
mended pressure is reached.
The sealant will be injected and
1
the pressure will spike to 44 psi
(300 kPa, 3.0 kgf/cm
58 psi (400 kPa, 4.0 kgf/cm
bar),
decrease.
The air pressure gauge will dis-
2
play the actual tire inflation pres-
sure about 1 minute (15 minutes at
low temperature) after the switch
is turned on.
Inject to recommended pressure.
3
• Turn the compressor switch off
and then check the tire inflation
pressure. Being careful not to
over inflate, check and repeat the
inflation procedure until the spec-
ified tire inflation pressure is
reached.
GS350_300_GS F_OM_OM30G34U_(U)
2
or bar) or
2
or
and then gradually
7-2. Steps to take in an emergency
491
7