346
5-5. Using the other interior features
Programming HomeLink
■
Steps
through
1
indicator light will stop flashing and programming will not be able to be com-
pleted.
Press and release the HomeLink
1
that the HomeLink
Point the remote control transmit-
2
ter for the device at the rear view
mirror, 1 to 3 in. (25 to 75 mm)
from the HomeLink
Keep the HomeLink
in view while programming.
Program a device.
3
Programming a device other than an entry gate (for U.S.A. owners)
Press and hold the remote control transmitter button until the HomeLink
indicator light changes from slowly flashing orange to rapidly flashing
green (rolling code) or continuously lit green (fixed code), then release the
button.
Programming an entry gate (for U.S.A. owners)/Programming a device
in the Canadian market
Press and release the remote control transmitter button at 2 second inter-
vals, repeatedly, until the HomeLink
flashing (orange) to rapidly flashing (green) (rolling code) or continuously
lit (green) (fixed code).
GS350_300_GS F_OM_OM30G34U_(U)
®
must be performed within 60 seconds, otherwise the
3
®
button you want to program and check
®
indicator light flashes (orange).
®
buttons.
®
indicator light
®
indicator light changes from slowly
®