Type B
Latch the buckles onto the LATCH
3
anchors. If the child restraint has a
top tether strap, the top tether strap
should be latched onto the top
tether strap anchor.
For owners in Canada:
The symbol on a child restraint sys-
tem indicates the presence of a
lower connector system.
Installing child restraints using a seat belt (child restraint lock function
belt)
Rear-facing ⎯ Infant seat/convertible seat
■
Place the child restraint system
1
on the rear seat facing the rear of
the vehicle.
Run the seat belt through the
2
child restraint system and insert
the plate into the buckle. Make
sure that the belt is not twisted.
GS350_300_GS F_OM_OM30G34U_(U)
65
1-1. For safe use
Canada only
1