Lexus GS350 Owner's Manual page 350

348
5-5. Using the other interior features
Press and hold the desired
3
HomeLink
vehicle) for 2 seconds and
release it. Repeat this sequence
(press/hold/release) up to 3
times to complete programming.
If the garage door opener motor
operates when the HomeLink
button is pressed, the garage
door opener motor recognizes
the HomeLink
Enabling 2-way communication with a garage door (only available for com-
■
patible devices)
When enabled, 2-way communication allows you to check the status of the
opening and closing of a garage door through indicators in your vehicle.
2-way communication is only available if the garage door opener motor used
is a compatible device. (To check device compatibility, refer to www.Home-
Link.com.)
Within 5 seconds after programming the garage door opener has been
1
completed, if the garage door opener motor is trained to HomeLink
both garage door operation indicators will flash rapidly (green) and the
light on the garage door opener motor will blink twice, indicating that 2-
way communication is enabled.
If the indicators do not flash, perform
the HomeLink
Press a programmed HomeLink
2
Within 1 minute of pressing the HomeLink
3
operation has stopped, press the "Learn" or "Smart" button on the garage
door opener motor. Within 5 seconds of the establishment of 2-way com-
munication with the garage door opener, both garage door operation indi-
cators in the vehicle will flash rapidly (green) and the light on the garage
door opener motor will blink twice, indicating that 2-way communication is
enabled.
GS350_300_GS F_OM_OM30G34U_(U)
®
button (inside the
®
®
signal.
®
button after programming has been completed.
®
and within the first 10 presses of
2 3
button to operate a garage door.
®
button, after the garage door
®
,