Lexus GS350 Owner's Manual page 349

Test the HomeLink
4
and observing the indicator light:
Indicator light illuminates: Programming of a fixed code device has com-
●
pleted. The garage door or other device should operate when a Home-
®
Link
Indicator light flashes rapidly: The garage door opener motor or other
●
device is equipped with a rolling code. To complete programming, firmly
press and hold the HomeLink
If the garage door or other device does not operate, proceed to "Pro-
●
gramming a rolling code system".
Repeat the steps above to program another device for any of the remaining
5
HomeLink
Programming a rolling code system
■
2 or more people may be necessary to complete rolling code programming.
Locate the "Learn" or "Smart"
1
button on the garage door
opener motor in the garage.
This button can usually be found
where the hanging antenna wire is
attached to the unit. The name and
color of the button may vary by man-
ufacturer. Refer to the owner's man-
ual supplied with the garage door
opener motor for details.
Press and release the "Learn" or
2
"Smart" button.
Perform
after performing
GS350_300_GS F_OM_OM30G34U_(U)
5-5. Using the other interior features
®
operation by pressing the newly programmed button
button is pressed and released.
®
®
buttons.
within 30 seconds
3
.
2
button for 2 seconds then release it.
347
5