Remote Dialing (Click To Dial); Setting Your Pin And Password - Mitel 6865i User Manual

Remote Dialing – Click to Dial
This feature is available via the website by using the Call Icon in the upper Right area of
the screen. You can also use the white empty rectangle placed in your system tray by the
Commportal Desktop Assistant.
If you like to make calls using a line other than your desktop phone, right Click on the
Commportal desktop icon and go to Place Call From. Choose or enter a new number to
place the calls from. Now when you dial a number or a contact name, the number you set
up will ring first. Once you answer the incoming call, the destination number will be
connected. Don't forget to revert back to use your phone once you are done, if you wish to
use your desktop handset again.
Setting Your Password and Pin
Log in to Commportal and go to the lower section of the dashboard in blue. Under the
Security heading, you can choose to CHANGE your "Password", Call Services Pin,
Security Email, and Voicemail Pin.
Commportal Password
Your new Commportal "Password" must be at least 8 characters and must contain at least 1
number and 1 character such as ~!@#$%^&*()_+}{.
Voicemail Pin
The pin must be between 4-20 numbers. You can not use numbers in a series like 1234,
nor can you use a repetitive number like 2222.
Call Services Pin
This pin is used for remote forwarding services of your line over a land line.
Security Email
This is used to send you a link to change your Commportal password if you have forgotten
it.
25