Sharp UX-D1200SE Operation Manual page 89

Table of Contents

Advertisement

SERVER ERROR
SERVER NOT FOUND/
CABLE DISCONNECTED
SERVER NOT FOUND/
DHCP
SERVER NOT FOUND/
SMTP
Audible signals
Continuous tone
Intermittent tone
(3 beeps)
A Fax to E-mail transmission was not successful
because the machine could not connect to your mail
server or there was no response from the mail server.
Make sure the SMTP server setting is correct (p. 43). If
you have configured "POP before SMTP" settings in the
Web pages, make sure these settings are correct. If
[CABLE DISCONNECTED] appears on the bottom line,
see "CONNECTION ERROR" on page 85.
See "CONNECTION ERROR" on page 85.
A Fax to E-mail transmission was not successful
because the machine was unable to automatically obtain
an IP address. Restart your router or other device that
acts as your DHCP server.
A Fax to E-mail transmission was not successful
because an incorrect host name is entered for your
SMTP server. Check the SMTP server setting (p. 43).
3 seconds
5 seconds
(1 second on, 1
second off)
Messages and Signals
Indicates the end of transmission,
reception, or copying.
Indicates incomplete transmission,
reception, or copying.
87

Advertisement

Table of Contents
loading

Table of Contents