Sharp UX-D1200SE Operation Manual page 85

Table of Contents

Advertisement

Cordless handset problems
Problem
The cordless handset
does not operate and
nothing appears in the
display.
Calls cannot be made or
received on the cordless
handset.
You hear noise or
interference during a call.
• Make sure the batteries are correctly inserted in the
cordless handset (see page 18).
• The batteries may be low. Place the cordless handset
in the charger and let it charge.
• Make sure the machine is plugged into a power outlet
and has power.
• Make sure the telephone line is properly connected to
both the TEL. LINE jack on the machine and the wall
jack (see page 15). (If the telephone line is connected
correctly, you should hear a dial tone when you pick
up the machine handset.)
• The batteries may be low. Place the cordless handset
in the charger and let it charge.
• Calls cannot be made or received while the machine
is being used. Wait until the machine is no longer
being used.
• Calls cannot be made or received during a power
failure.
• You may be outside of the talking range. Move closer
to the machine.
• Other electrical appliances may cause interference.
Move away from any electrical appliances.
• Move closer to the machine. Note that large metal
objects, metal structures, and thick walls between the
machine and cordless handset will reduce the talking
range. If needed, try moving the machine to a different
location.
Problems and Solutions
Solution
83

Advertisement

Table of Contents
loading

Table of Contents