Troubleshooting; Problems And Solutions - Sharp UX-D1200SE Operation Manual

Problems and Solutions

11. Troubleshooting

Problems and Solutions
If you have any problems with the machine, first refer to the following
troubleshooting guide. If you cannot solve the problem, call Sharp's Customer
Assistance Center at 1-877-794-8675.
♦
For network connection problems (Fax to E-mail), see page 41.
Line error
Problem
LINE ERROR appears in
the display.
Dialing and transmission problems
Problem
No dial tone when you
pick up the handset or
press the SPEAKER key.
80
A line error occurs when your machine cannot
communicate correctly with another fax machine. The
error is usually due to a problem on the phone line.
Try faxing again. If unsuccessful, check the following:
• Check the connection. The cord from the TEL. LINE
jack to the wall jack should be no longer than six feet.
• Make sure there are no modem devices sharing the
same telephone line.
• Check with the other party to make sure their fax
machine is functioning properly.
• Have your telephone line checked for line noise.
• Try connecting the machine to a different phone line.
• If the error persists, the machine may need service.
• Make sure the handset cord is connected to the
correct jack. See Connect the handset on page 11.
• Make sure that the telephone line is properly
connected to both the TEL. LINE jack and the wall
jack (see page 15).
• Make sure that the telephone line is good.
Solution
Solution