Using The Phonebook - Sharp UX-D1200SE Operation Manual

5
When you are ready to end the call,
replace the handset.

Using the Phonebook

You can store your most frequently
dialed numbers for automatic dialing.
Numbers can be stored in the
phonebook in the cordless handset, or
in the machine. To store a number in the
cordless handset, follow the steps
below.
♦
Up to 100 numbers can be stored in
the phonebook in the cordless
handset. Numbers stored in the
cordless handset can only used by the
cordless handset.
♦
To store a number in the machine, see
page 52. The cordless handset can
also use numbers that are stored in
the machine.
Storing phone numbers in the
cordless handset phonebook
1
Press to open the phonebook.
(You can also press
"PHONEBOOK" appears and press
OK.)
2
Press or to display "<NEW>".
(The first time you store a number in
the phonebook, only "<NEW>"
appears.) Press
3
Enter the name of the party.
•
To enter a letter, repeatedly press the
number key shown for the letter
below until the letter appears.
or until
(Valid.).
Using the Phonebook
= 1
= A, B, C, a, b, c, 2
= D, E, F, d, e, f, 3
= G, H, I, g, h, i, 4
= J, K, L, j, k, l, 5
= M, N, O, m, n, o, 6
= P, Q, R, S, p, q, r, s, 7
= T, U, V, t, u, v, 8
= W, X, Y, Z, w, x, y, z, 9
= special characters
= /, space, +, @, -, $, &, %, 0
= # , " . : ; ! ? ' ( ) _
•
To clear a mistake, press C.
•
To enter a special character, press
, press or
character is selected, and press OK.
4
When you have finished entering
the name, press
5
Press the number keys to enter the
phone number. When finished,
press (Valid.).
•
If a pause is required between any of
the digits to access a special service
or an outside line, hold down
until a slash (/) appears.
6
Press or to select an icon for
the number.
until the desired
(Valid.).
23