Printer Setup
Selecting a
Location
Place your printer on a flat, stable surface near your
workstation. Leave enough space around the printer, so
that you can easily:
•
Open the printer cover.
•
Open the rear cover to remove jammed paper, or
retrieve the paper when you use the rear face-up
stacker.
•
Remove and install the paper tray(s) to load paper.
•
Allow air circulation around the exhaust fan and vent
to prevent the printer from overheating.
Do not place the printer:
•
In direct sunlight.
•
Near heat sources or air conditioners. Place the printer
where the temperature is stable and set for comfort.
•
In dusty or dirty environments. Dust accumulation
may prevent the printer from functioning properly.
•
Near devices that contain magnets or generate
magnetic fields (such as loudspeakers or base units of
cordless telephones).
Printer Setup
Chapter 1: Getting Started
1-9