Door Lock Output Wiring - Marksman X6 Installation Manual

Wiring
(continued)
HC3: Black 3-Pin Door Lock Harness
Blue Wire: (-) Door Lock Control
If the door lock control system on the vehicle is (-) type, connect the Blue wire to the unlock wire from the door
lock switch . If the door lock control system on the vehicle is not (-) type, locate the diagram enclosed that
matches your application and follow that diagram.
Green Wire: (-) Door Lock Control
If the door lock control system on the vehicle is (-) type, connect the Green wire to the lock wire from the door
lock switch . If the door lock control system on the vehicle is not (-) type, locate the diagram enclosed that
matches your application and follow that diagram
3 Wire Ground Trigger Door Lock System
Black 3-Pin
Mini Connector
To Door Lock
Control Relays
3 Wire Positive Door Locking Systems
Blue Wire
Green Wire
Black 3-Pin
Mini Connector
Note: ALA-DL1 relay
pack can be used
5 Wire Ground at Rest Door Locking Systems
Blue Wire
Green Wire
Black 3-Pin
Mini Connector
Black Wire: Unlock
ALA-DL1
Relay Pack
Note: Orange wire from ALA-DL1
must be connected to +12V
8
Blue Wire: Connect to Unlock
Green Wire: Connect to Lock
87 87
87A
87A
85 85
86
30
To Factory Door
Lock SYstem
Red Wire: Lock
87 87
87A
87A
85 85
86
30 30
To +12 Volts
(Battery +)
86
30
Violet Wire
To +12 Volts
(Battery +)
86
White Wire: Lock
To Power
Brown Wire: Unlock
Lock Switch
Green Wire: Lock
To Power
Blue Wire: Unlock
Lock Motors
Lock Control
Switch
( - ) Lock Out
Ground Input
( - ) Unlock Out
Lock Control
Switch
(+) Lock Out
+12 Volts Input
(+) Unlock Out