Keyless Entry Feature Programming - Marksman X6 Installation Manual

Keyless Entry Feature Programming (Group 1)
With the ignition switch in the OFF position, turn the
ignition switch On - Off - On - Off - On - Off.
Press the transmitter buttons as illustrated to adjust the features required. Keep re-pressing the transmitter button
that relates to the feature you want to adjust until the correct amount of chirp/beeps is heard then move on to the
next feature.
One Chirp
Button One LED Pulse
(Default Setting)
Pathway Illumination
HC4 Light Blue Wire:
2nd Unlock Output
HC2 Brown Wire:
(-) Horn Output
HC4 White Wire:
+ (-) Domelight Supervision
Normal Horn Output
Pulse Duration
+
Five Chirps
Five LED Pulses
PVID 4 Horn Output
S-M-L-S-M-L
18
Step 1
Remote Feature Programming
Two LED Pulses
All Chirps On
Parking Light On for 30 sec.
after Unlock Signal
Off
HC4 Light Blue Wire:
Fact. Security disarm Output
HC2 Brown Wire:
Fact. Security Re-arm Output
HC4 White Wire:
(-) Output During Starting
Output
PVID 1 Horn Output
S-S-S - L-L-L - S-S-S
Six LED Pulses
PVID 5 Horn Output
3X
Before 15 seconds has passed, push and release the
valet switch 2 times holding the button down on the
2nd press. Wait until you hear 1 short and 1 long
chirp/beeps. Release the button. You are now in "Alarm
Feature Programming (Group 1)" mode.
Step 3
Two Chirps
Three LED Pulses
All Chirps Off
Parking Light On 10 sec.
after Lock and 30 sec. after
HC4 Light Blue Wire:
Start Status Output
Six Chirps
S-S - L - S-S
Step 2
1X + 1X (Hold)
Three Chirps
Unlock
PVID 2 Horn Output
S-L-S-L
Four Chirps
Four LED Pulses
PVID 3 Horn Output
S-S-S-L