Remote Start Feature Programming - Marksman X6 Installation Manual

Remote Start Feature Programming (Group 1)
With the ignition switch in the OFF position, turn the
ignition switch On - Off - On - Off - On - Off.
Press the transmitter buttons as illustrated to adjust the features required. Keep re-pressing the transmitter button
that relates to the feature you want to adjust until the correct amount of chirp/beeps is heard then move on to the
next feature.
Button One LED Pulse
(Default Setting)
Five Chirps
10 Minute Run Time
Factory Alarm Disarm
with Channel 3 "On"
Constant Parking
Light Output
Press the ( * - * )
Button = Activates
+
Remote Start
3 Hour Time Start
+
20
Step 1
Remote Feature Programming
One Chirp
Two LED Pulses
Gasoline Diesel Engine and
10 Second Warm-up
Engine
Diesel-DBI
20 Minute Run Time
Without this Feature
Press the ( * ) Button =
Activates Remote Start
2 Hour Time Start
3X
Before 15 seconds has passed, push and release the
valet switch 8 times holding the button down on the
8th press. Wait until you hear 4 short chirps/beeps + 1
long chirp beep. Release the button. You are now in
"Remote Start Feature Programming" mode.
Step 3
Two Chirps
Three LED Pulses
30 Minute Run Time
Flashing Parking
Light Output
Step 2
7X + 1X (Hold)
Three Chirps
Diesel Engine and
15 Second Warm-up
Four Chirps
Four LED Pulses
Diesel Engine and
20 Second Warm-up
5 Minute Run Time