Ignition modes
The vehicle's ignition can be put in various
modes (levels) to make different functions availa-
ble.
To enable the use of a limited number of func-
tions when the engine is not running, the ignition
can be put in one of three different levels: 0, I
and II. These levels are referred to as "ignition
modes" in the Owner's Manual.
The following table shows which functions are
available in each ignition mode:
Mode
Functions
•
0
The odometer, clock and tem-
perature gauge are illuminated
•
The power seats* can be
adjusted.
•
The power windows can be used.
•
The center display is activated
A
and can be used
.
•
The 12 V outlet in the cargo com-
partment* can be used.
•
The infotainment system can be
A
used
.
In this ignition mode, the functions are
available for a limited time and then
switch off automatically.
I
•
The panoramic roof, power win-
dows, 12 V outlet in passenger
compartment, Bluetooth, naviga-
tion, phone, blower and wind-
shield wipers can be used.
•
The power seats can be adjusted.
•
The 12 V outlet in the cargo com-
partment can be used.
Electrical current will be taken
from the battery in this ignition
mode.
Mode
Functions
•
II
The headlights illuminate.
A
.
•
Warning/indicator lights illumi-
nate for 5 seconds.
•
A number of other systems are
activated. However, seat and rear
window heating can only be acti-
vated when the engine is running.
This ignition mode uses a lot of
current from the battery and
should be avoided whenever pos-
sible!
A
Also activated when the door is opened.
Related information
•
Starting the vehicle (p. 400)
•
Adjusting the steering wheel (p. 200)
•
Jump starting using another battery (p. 439)
•
Selecting ignition mode (p. 404)
STARTING AND DRIVING
403
* Option/accessory.