Front Seat - Volvo V90 Owner's Manual

Using stored memory in a powered

front seat

The memory function can be used to store the
settings for the seat, door mirrors and head-up
display*.
Using a stored position
A stored position can be used with the front door
open or closed:
Front door open
–
Briefly press one of the memory buttons (1
or 2). The seat, door mirrors and head-up
display will move and stop at the positions
stored in that button.
Front door closed
–
Press and hold one of the memory buttons
(1 or 2) until the seat, door mirrors and
head-up display stop in the positions stored
in that memory button.
If the memory button is released, the seat, door
mirrors and head-up display will stop moving.
WARNING
•
Because the front seats can be adjusted
with the ignition off, children should never
be left unattended in the vehicle.
•
Movement of the seat can be STOPPED
at any time by pressing any button on the
power seat control panel.
•
Do not adjust the seat while driving.
•
The seat should be adjusted so that the
brake pedal can be depressed fully. In
addition, position the seat as far rearward
as comfort and control allow.
•
The seat rails on the floor must not be
obstructed in any way when the seat is in
motion.
Related information
•
Manual front seats (p. 188)
•
Power front seats* (p. 189)
•
Adjusting the power front seats* (p. 189)
•
Storing memory settings in power front
seats* (p. 190)
•
Adjusting front seat massage settings*
(p. 192)
•
Adjusting front seat cushion length (p. 193)
•
Front seat massage settings* (p. 192)
•
Adjusting front seat side bolster settings*
(p. 194)
SEATS AND STEERING WHEEL
•
Adjusting front seat lumbar support* (p. 194)
•
Adjusting the passenger seat from the driv-
er's seat* (p. 195)
191
* Option/accessory.