Distance Alert - Volvo V90 Owner's Manual

Function buttons and symbols 33 .
To turn off Cruise Control:
1. Press the button on the steering wheel
(2).
> Cruise Control will go into standby mode.
Press the ◀ (1) or ▶ (3) buttons on the
2.
steering wheel to select another function.
>
The Cruise Control symbol
the instrument panel will go out and the
set speed will be erased.
3. Press the (2) button on the steering
wheel keypad again.
> Another function will be activated.
33 Note: This illustration is general and details may vary depending on model.
34

Distance Alert

NOTE
In vehicles equipped with Adaptive Cruise
Control*, it is possible to switch between
cruise control and Adaptive Cruise Control –
see the heading "Switching between CC and
ACC".
Related information
•
Cruise control (p. 280)
(4) in
DRIVER SUPPORT
Distance Alert*
34
The Distance Alert function can help the driver
become aware if the time interval to the vehicle
in front is too short.
However, the vehicle must be equipped with a
head-up display in order to display the Distance
Alert, which will then be indicated by a symbol
on the windshield as long as the time interval to
the vehicle ahead is shorter than the set time
interval.
Distance Alert is active at speeds above 30 km/h
(20 mph) and only reacts for vehicles ahead mov-
ing in the same direction as your vehicle. No dis-
tance information is provided for oncoming, slow-
moving or stationary vehicles.
NOTE
•
Distance Alert is only available in vehicles
that can display information on the wind-
shield with a head-up display.
•
Distance Alert is deactivated while Adap-
tive Cruise Control is active.
}}
285
* Option/accessory.