Recommended maintenance for
BLIS
•
For optimal performance, it is important to
keep the areas in front of the sensors clean.
•
Do not attach any objects, tape or decals to
the surface of the sensors.
Keep this area clean (on both the left and right sides of
83
the vehicle)
.
The BLIS sensors are located on the inside of
each of the rear fenders/bumpers and are also
used by the Cross Traffic Alert (CTA) and Rear
Collision Warning functions.
83
Note: This illustration is general and details may vary depending on model.
CAUTION
Repair of BLIS and CTA components or
repainting of the bumper may only be per-
formed by a workshop – an authorized Volvo
workshop is recommended.
Related information
•
BLIS* (p. 342)
•
Cross Traffic Alert* (p. 347)
•
Activating/deactivating Cross Traffic Alert
(p. 348)
•
Cross Traffic Alert limitations (p. 348)
•
Recommended maintenance for Cross
Traffic Alert (p. 349)
•
Cross Traffic Alert messages (p. 350)
•
Rear Collision Warning (p. 341)
DRIVER SUPPORT
345
* Option/accessory.