Managing Pilot Assist Speed - Volvo V90 Owner's Manual

DRIVER SUPPORT
|| With Adaptive Cruise Control in standby mode:
1. Press the ▶ button on the steering wheel (6).
> The
symbol will change to Pilot
Assist in standby mode (8).
2. Press the button on the steering wheel
(2).
> Pilot Assist will start and the current
speed will be stored, which will be shown
by numbers in the center of the speedom-
eter.
...or...
With Adaptive Cruise Control started:
Press the ▶ button on the steering wheel (6).
–
> Pilot Assist will start.
Pilot Assist's steering assis-
tance is only active when the
steering wheel symbol (2)
changes from GRAY to
GREEN.
Pilot Assist will only regulate
the time interval to the vehicle ahead when the
distance symbol shows a vehicle (1) over the
steering wheel symbol.
310
A speed interval will be marked
at the same time.
The higher speed is the set
speed for your vehicle and the
lower speed is the speed of the
vehicle ahead (target vehicle).
Hands on the steering wheel
Pilot Assist only functions if the driver's hands
are on the steering wheel. If Pilot Assist detects
that the driver's hands are not on the steering
wheel, the driver will be instructed to actively
steer the vehicle by a text message and an audi-
ble signal.
If Pilot Assist still cannot detect the driver's
hands on the steering wheel, the function will go
into standby mode. Pilot Assist must then be
reactivated by pressing the button on the
steering wheel.
NOTE
Note that the Pilot Assist function only works
when the driver's hands are on the steering
wheel.
Related information
•
Pilot Assist (p. 305)

Managing Pilot Assist speed

Pilot Assist can be set to various speeds.
Setting/changing set speed
Note: This illustration is general and details may vary
depending on model and market.
: Increases the set speed
: Reduces the set speed
Set speed