Table of Contents
Advertisement
www.HomeLink.com, www.youtube.com/
HomeLinkGentex or call 1-800-355-3515.
Programming individual buttons
To program an individual HomeLink
1. Press and hold the desired button for about
20 seconds.
2. When the indicator light on HomeLink
starts flashing slowly, it is possible to pro-
gram as usual.
Note: If the button you are reprogramming
does not program with a new device, it will
return to the previously saved programming.
®
Resetting the HomeLink
buttons
It is only possible to reset all HomeLink
at once. It is not possible to reset individual but-
tons. Individual buttons can only be reprogram-
med.
–
Press and hold the outer buttons (1 and 3)
®
on HomeLink
for about 10 seconds.
> When the indicator light goes from a
steady glow to flashing, the buttons have
been reset and are ready for reprogram-
ming.
Related information
•
Using HomeLink (p. 449)
•
®
* (p. 447)
HomeLink
•
®
Type approval for HomeLink
Using HomeLink
Once HomeLink
used instead of the separate remote controls.
Press and hold the programming button. The
®
button:
garage door, gate, alarm system, etc. will be acti-
vated (this may take several seconds). If the but-
ton is held down for more than 20 seconds,
reprogramming will begin. The indicator light will
®
glow steadily or flash when the button has been
pressed. The original remote controls may be
used concurrently with HomeLink
NOTE
If the ignition is off, HomeLink
30 minutes after the driver's door has been
®
opened.
buttons
* (p. 450)
®
is programmed, it can be
®
if desired.
®
works for
STARTING AND DRIVING
WARNING
•
®
If you use HomeLink
to open a garage
door or gate, be sure no one is near the
gate or door while it is in motion.
•
®
Do not use HomeLink
with any garage
door opener that lacks safety stop and
reverse features as required by US fed-
eral safety standards (this includes any
garage door opener model manufactured
before April 1, 1982). A garage door that
cannot detect an object - signaling the
door to stop and reverse - does not meet
current U.S. federal safety standards. For
more information, contact HomeLink at:
www.homelink.com.
Related information
•
®
* (p. 447)
HomeLink
•
®
* (p. 448)
Programming HomeLink
•
®
Type approval for HomeLink
* (p. 450)
449
* Option/accessory.
Advertisement
Table of Contents
