Sata Raid 5 Upgrade Key - Installation / Removal; Installing The Sata Raid 5 Upgrade Key; Removing The Sata Raid 5 Upgrade Key; Figure 42. Installing The Sata Raid 5 Upgrade Key - Intel R1000SPO series Service Manual
Server system
Hide thumbs
Also See for R1000SPO series:
- Configuration manual (48 pages) ,
- Technical product specification (93 pages)
Table of Contents
Advertisement
Intel
®
Server System R1000SPO Product Family System Integration and Service Guide
3.5
SATA RAID 5 Upgrade Key – Installation / Removal
3.5.1
Installing the SATA RAID 5 Upgrade Key
1.
Remove the SATA 5 Upgrade Key from its packaging.
2.
Locate the white 4-pin key connector behind the onboard NIC 2 port on the back edge of the server
board.
3.
To install the key, place it over the connector and confirm the orientation of the key matches that of the
connector.
4.
Press the key down onto the connector.
3.5.2
Removing the SATA RAID 5 Upgrade Key
1.
Power off the system and disconnect the power cable(s).
2.
Remove the system cover (see section 2.2.1).
3.
Using the Key pull tab, pull the key up until it disengages from the connector.
Figure 43. Installing the SATA RAID 5 Upgrade Key
37
Advertisement
Table of Contents
