Transmitter Quick View Of Parameters - Honeywell XYR 6000 User Manual

5. Operation

5.4. Transmitter quick view of parameters

Transmitter Wireless Builder display
display
blank* Heap Memory Not
Available*
blank* Watchdog Timer Error*
5.4 Transmitter quick view of parameters
If the Up or Down key is pressed using the Authentication Device while in PV display mode, the display
will enter parameter quick view mode. Successive presses of the Up key will increment to the next
parameter in the following table, or exit to PV mode if at the last parameter. The Down key will
decrement to the previous parameter or exit if at the first parameter. The Enter key will exit to PV display
mode at any time.
Position
1
2
3
4
5
6
7
8
9
10
20
Parameter
Vendor Name
HONEYWELL
Tag Name
SDREV
SBLD
Radio Type
RBLD
WFN
NET
MODE/CHANNEL
OneWireless XYR 6000 Pressure Transmitter R120 User's Manual
Definition
Heap Allocation Failure.
Software detected heap
shortage and some
communication packets
may have been dropped.
Sensor Watchdog
Timeout. The processor
was restarted due to
unexpected operation.
HONEYWELL
XYR 6000 MULTI AI DI DO
HON_XYR6000_MAIDIDO_1234567890
Sensor device revision
Sensor build number
DSSS
Radio build number
Wireless field network identifier
Network device address
Frequency hopping mode & channel
What to do
Clear by warm restart of device. If
condition persists contact
Honeywell service.
Clear by warm restart of device. If
condition persists contact
Honeywell service.
Description
November 2010
Revision 8