Sharp MX-B382 Technical Handy Manual page 44

JOB LOG ERROR CODES
Error Job Log / Status Monitor Message
0410
0411
0413
0414
0415
0416
0417
0418
The requested job was interrupted due to
0419
041A
041B
041F
0420
0421
0422
0423
0424
0425
0426
0427
0428
0429
The requested job was cancelled due to the
042A
042B
042C
042D
042E
042F
0430
0431
0432
0433
0434
0435
0436
You don't have the authority to use this
0437
function. The requested job was cancelled
due to the following reason:
0438
0439
043A
The requested job was cancelled due to the
0440
0445
44
the following reason:
following reason:
following reason:
Comment
(Selected input tray: Prohibited)
(Staple: Too many pages)
(Incorrect setting parameter)
(Data format is not supported)
(Storage: Full)
(Selected paper cannot be used)
(Carbon Copy: Incorrect setting parameter)
(Covers/Inserts: Incorrect setting parameter)
(Document filing: Selected folder does not exist)
(Document filing: Incorrect folder password)
(Document filing: No. of jobs exceeded the limit)
(Covers/Inserts: Prohibited)
(Output tray: Prohibited or failure)
(Disabling of Sharing Mode)
(Disabling of Confidential Mode)
(Disabling of Storing to the selected folder)
(Disabling of Document Filing)
(Disabling of Print Jobs other Than Hold Job)
(Disabling of Print Jobs other Than Hold Job and
Disabling of Sharing Mode)
(Disabling of Print Jobs other Than Hold Job and
Disabling of Confidential Mode)
(Disabling of Print Jobs other Than Hold Job and
Disabling of Storing to the selected folder)
(Disabling of Print Jobs other Than Hold Job and
Disabling of Document Filing)
(Disabling of Print Jobs other Than Hold Job and
Disabling of Quick File Mode)
(Retention printing: Prohibited)
(Hard disk full or memory full)
(Offset: Disabled)
(Disabling of printing)
(Invalid user)
(Number of allowable pages exceeded the limit)
(Print quality: Conflict of setting parameter)
(PCL is not available) Check the printer driver.
(SPLC is not available) Check the printer driver.
(PDF is not available) Check the printer driver.
(Colour mode: Disabling of full colour)
(Colour mode: Disabling of B/W)
(Colour mode: Disabling of B/W and full colour)
(Only 2-sided print approved)
(1-sided/2-sided print disabled)
(Staple: Prohibited)
(B/W or Auto job is sent when Document control
pattern is set to always print in colour.)
(Incorrect paper size)
SHARP