Sharp MX-B382 Technical Handy Manual page 15

SHARP
Maintenance Schedule
Note: Auto DV Adjustment (Sim 25-02) and Developer/Drum Counter Clear (Sim 24-05 & 24-07) are
executed automatically when the relevant consumable unit is replaced (Advanced SRU).
60K Transfer Section:
Replace Secondary Transfer Roller Unit (MX-C38U2).
Sim 22-01
72K Process Section –Black:
(or when the Black maintenance counter has reached the specified life).
Replace Black Drum Unit (MX-C38GRB)
Replace Black Developer Unit (MX-B42GV1).
Sim 22-13
Sim 22-13
Sim 24-04
Image Quality Adjustments:
Sim 44-02
Sim 44-06
Sim 46-74
Sim 46-02
General:
In addition to Black Maintenance Schedule, perform the following:-
Clean all optics, CCD, and white reference plate.
Clean all RSPF sensors.
Paper Feed & Transport:
Check/Clean all Paper Path Sensors (including Duplex unit).
Check/Clean/Replace PF Rollers (check tray counter using Sim 22-09).
Sim 24-02
120K Maintenance Schedule:-
In addition to 60K Maintenance Schedule, perform the following:-
Fuser Section:
Replace Heat Roller Kit or Fuser Unit:-
Sim 24-04
Description
Check TC2 Unit, TC2 RN Unit Range & TC2 DY Unit Day
Counters have been reset automatically (normally Sim 24-04)
Note: When MX-C31U2 (Primary Transfer Unit) is used, the
Secondary Transfer unit counters are reset automatically.
Check K (Black) Developer Counter has been reset automatically.
Check K (Black) Drum Counter has been reset automatically.
Clear Maintenance [ALL] Counter.
Image Density & Registration Sensor Adjustment.
Process Control execution.
Automatic Colour Balance Adjustment (Copy & Printer).
Adjust Copy Exposure Density (B/W).
Clear Individual Tray Counter when P/F Rollers are replaced.
 Heat Roller Kit (MX-B42HK) or
 Fuser Unit (MX-B42FU).
Clear Fuser Unit Counters (U & E )
Clear Fuser Day Counter (U)
Clear Fuser Unit External Day Counter (AIE)
Note: When MX-C32FU (Fuser Unit) is used, the Fuser
Counters are reset automatically.
MAINTENANCE
15