Name Plate Of Non-Modular Devices (7Xx82) - Siemens SIPROTEC 5 Series Hardware Description

Technical Data

6.16 Name Plate of Non-Modular Devices (7xx82)

6.16 Name Plate of Non-Modular Devices (7xx82)
In the following table, the name plate of a non-modular device is explained as an example. The name plate is
located on the device.
7SJ82
Overcurrent Protection
IO110 IO102
I U , f
rated, rated rated
I
load
V
aux
P1JXXXXXXXXXX
BMXXXXXXXXXX
E, F
236
Device type
Product group
Designation of the I/O printed circuit board assemblies
Rated values (which are specified when current and/or
voltage transformers are placed on the printed circuit board
assembly)
This value is specified when relays are placed on the printed
circuit board assembly.
Values for the power supply
Technical Numbering System (TNS), maximum 18 digits
Serial number
QR code
Insulation test of the voltage inputs, current inputs, and
binary outputs with AC 2.5 kV
Insulation test of the power supply (V
(BI) with DC 3.5 kV
Insulation testing of all sealed-off interfaces with DC 700 V
Designation of the ports into which the plug-in modules are
plugged.
5 kV impulse voltage test [type test] in compliance with
Class III
European CE marking
Pay attention to the overall documentation for the device
(Product information, Device manual, Hardware manual,
Operating manual, and Communication protocol manuals)
SIPROTEC 5, Hardware Description, Manual
C53000-G5040-C002-C, Edition 10.2017
) and binary inputs
aux