Siemens SIPROTEC 5 Series Hardware Description page 25

[le_rear expansion module, 1, --_--]
Figure 2-7
(1) Current terminal xA
(2) Spring clip
(3) Voltage terminal xB
(4) Bus terminal to the base module
(5) Voltage terminal xC
(6) Voltage terminal xD
(7) Protective grounding terminal
NOTE
i
i
These modules can be installed in the 1st and 2nd device rows. x corresponds to the slot in the 19-inch
rack.
Possible values in the 1st device row: x = 3, 4, 5, or 6
Possible values in the 2nd device row: x = 8, 9, 10, 11 or 12
SIPROTEC 5, Hardware Description, Manual
C53000-G5040-C002-C, Edition 10.2017
Rear View of the Expansion Module
Forms of Devices and On-Site Operation Panels
2.1 Flush-Mounting Devices
25