Siemens SIPROTEC 5 Series Hardware Description page 200

Technical Data
6.6 Communication Interfaces
Signal Levels/
Burdens
V
IHigh
V
ILow
I
IHigh
R
I
On-Site Operation Panel for Surface-Mounting Housing (Port H) (Available only for Modular Devices)
The terminal for the on-site operation panel of surface-mounted devices is located on the D-sub 15 interface
(position H). The on-site operation panel of surface-mounted devices with integrated or detached on-site oper-
ation panel is connected to this interface.
User interface
Connection
Insulation class
Integrated Ethernet Interface (Port J)
This terminal is used to load the device with DIGSI 5 using Ethernet. This terminal also enables IEC 61850
Ethernet communication or communication with another protocol via Ethernet, for example, for connecting
an external RTD unit.
Interface
Connection
Connector type
Baud rate
Max. line length
Insulation class
200
Signal Rated Input Voltage, DC
5 V
6.0 V
1.0 V at
I = 0.25 mA
ILow
4.5 mA to 9.4 mA
890 Ω at V = 4 V
I
640 Ω at V = 6 V
I
Detached on-site operation panel
On the rear side
D-sub 15
PELV (according to IEC 60255-27)
Integrated Ethernet interface
(1)
(2)
1 x RJ45
100 Mbit/s
20 m with Ethernet patch cable CAT 5
SELV (acc. to IEC 60255-27)
12 V
15.8 V
1.4 V at
I = 0.25 mA
ILow
4.5 mA to 9.3 mA
1930 Ω at V = 8.7 V
I
1700 Ω at V = 15.8 V
I
LED 1: Yellow
LED 2: Green
SIPROTEC 5, Hardware Description, Manual
C53000-G5040-C002-C, Edition 10.2017
24 V
31.0 V
1.9 V at
I = 0.25 mA
ILow
4.5 mA to 8.7 mA
3780 Ω at V = 17 V
I
3560 Ω at V = 31 V
I