Getting Started
3.6
Operation of SIPROTEC Devices from the Operator Panel
In addition to operating your station with the DIGSI software (see Chapter 6, page
209), the 7SS52 V4 allows you to operate the central unit and the bay units 7SS523
locally from the user interface on the device.
3.6.1
User Interface
The following sections describe succinctly in a few typical operations how to navigate
the user interface from the integrated operator panel. The illustrations of the examples
show each menu completely. The display on the device shows only 4 lines at a time.
3.6.2
Navigating the Operating Tree of the Display
The user interface of the central unit and the bay unit is composed of a hierarchically
structured operating tree which is navigated by means of the navigation keys and the
keys:
Central unit
Bay unit
40
MENU
(only in the central unit),
With the device ready for operation, press first the key
MENU.
Next, select with the navigation keys
tion key
to enter the submenu.
Go on moving in the same way through the operating tree until you have reached
the information you are looking for.
To move back one level, press the navigation key
To move back menu item, press the navigation key
Be pressing again the key
the MAIN MENU.
Select a menu item directly with the navigation keys
gation key
to enter the submenu.
Go on moving in the same way through the operating tree until you have reached
the information you are looking for.
To move back one level, press the navigation key
To move back menu item, press the navigation key
ESC
Be pressing the key
you return to the next higher level.
ENTER
ESC
and
.
or
a menu item and press the naviga-
or by repeatedly pressing the key
MENU
MENU
, to enter the MAIN
.
.
ESC
you return to
or
and press the navi-
.
.
7SS52 V4 Manual
C53000-G1176-C182-3