Factory Setting - Siemens Sirius 3RW44 System Manual

2.5

Factory setting

SIRIUS 3RW44 manual
GWA 4NEB 535 2195-02 DS 01
We recommend you apply the factory settings (default settings)
• in the event of faulty parameterization
• if SIRIUS 3RW44 soft starters that have already been parameterized are to
be used further in other systems.
Notice
If this is not done, drives may start running because of the present
parameterization.
Soft starters already parameterized by the operator can be set back to the
factory setting without additional auxiliary tools being needed.
For a reset to the factory setting, refer to Section 5.4.13 Saving options.
Configuration instructions
2-7