Mazda CX-9 2018 Owner's Manual page 485

4. Pull the center of each plastic retainer
and remove the retainers, and then
partially peel back the mudguard.
5. Disconnect the wiring harness by
releasing the clamp.
6. Turn the socket and bulb assembly
counterclockwise and remove it.
CX-9_8GC3-EA-17G_Edition1
Removal
Installation
Owner Maintenance
7. Disconnect the bulb from the socket.
Front turn signal lights
Parking lights/Front side-marker
lights
8. Install the new bulb in the reverse
order of the removal procedure.
NOTE
There will be no problem with
functionality with the wiring harness
disconnected in Step 5 left
disconnected.
Therefore, there is no need to connect
the wiring harness.
Maintenance and Care
6-47
2017-5-29 10:13:38