Mazda CX-9 2018 Owner's Manual page 269

How to set the speed
1. Adjust the vehicle speed to the desired setting using the accelerator pedal.
2. Headway control begins when the SET or SET switch is pressed.
The set speed and the inter-vehicle distance display filled with white lines is displayed.
The MRCC with Stop & Go function main indication (white) switches to the MRCC
with Stop & Go function set indication (green) at the same time.
Travel status
During travel at constant speed
During travel under headway con-
trol
NOTE
If a vehicle ahead is detected while traveling at a constant speed, the vehicle-ahead
•
indication is displayed and headway control is performed. Additionally, when a vehicle
ahead is no longer detected, the vehicle-ahead indication turns off and the system
switches back to travel at constant speed.
The lowest possible speed which can be set on the MRCC with Stop & Go function system
•
is 30 km/h (19 mph).
Headway control is not possible if the vehicle ahead is driving faster than your vehicle's
•
set speed. Adjust the system to the desired vehicle speed using the accelerator pedal.
CX-9_8GC3-EA-17G_Edition1
Indication on multi-information
display
When Driving
i-ACTIVSENSE
Indication on active driving dis-
play
4-115
2017-5-29 10:13:38