Mazda CX-9 2018 Owner's Manual page 282

When Driving
i-ACTIVSENSE
Vehicle lane line display
When the LAS&LDWS becomes
operational while on standby, the vehicle
lane lines are displayed in the
multi-information display and the active
driving display. In the vehicle lane lines
display indicating the operation status, the
color of the vehicle lane lines being
detected changes to white.
(Stand-by status)
Multi-information Display
Active Driving Display
(Operational status)
Multi-information Display
Active Driving Display
4-128
CX-9_8GC3-EA-17G_Edition1
Auto cancel
In the following cases, the LAS&LDWS is
automatically canceled, the LAS&LDWS
warning indication (amber) turns on, and
an alert is displayed. When the
LAS&LDWS become operational, the
system turns back on automatically.
The temperature inside the camera is
•
high or low.
The windshield around the camera is
•
foggy.
The windshield around the camera is
•
blocked by an obstruction, causing poor
forward visibility.
Auto cancel of warning/steering assist
When the following operations are
performed, the LAS&LDWS operation is
canceled automatically. The LAS&LDWS
resumes automatically after the operation.
The steering wheel is operated abruptly.
•
The brake pedal is operated.
•
The accelerator pedal is operated.
•
(To cancel the automatic sensitivity
cancel function, deselect "Cancel
sensitivity" in the personalization
features setting.)
The turn signal lever is operated.
•
The vehicle crosses a lane line.
•
NOTE
After the operation, the LAS&LDWS
•
operation may not operate for a period
of 5 seconds at the most until the lane
lines are detected.
Under the following conditions, the
•
LAS&LDWS cancels the warning/
steering assist automatically.
2017-5-29 10:13:38