Essential Safety Equipment
Seats
▼ Driving Position Memory
The desired driving position can be called
up after programming the position.
The following driving positions can be
programmed.
Driver's seat position (seat slide, height
•
adjustment, front edge of seat bottom,
seat recline)
Refer to Seat Operation on page 2-5.
Active driving display (display position,
•
brightness level, display information)
Refer to Active Driving Display on page
4-28.
CAUTION
Do not place fingers or hands around the
bottom of the seat while the seat memory
function is operating. The seat moves
automatically while the seat memory
function is operating and fingers or hands
could get pinched and injured.
SET button
A driving position can be programmed or
operated using the buttons on the side of
the seat or the key.
2-8
*Some models.
CX-9_8GC3-EA-17G_Edition1
NOTE
*
Lumbar support adjustment cannot be
•
programmed.
A driving position can be programmed
•
to the buttons on the side of the seat and
the key in use for driving the vehicle.
If the vehicle has been serviced and the
•
battery cables disconnected, the
programmed seat positions will have
been erased. Re-program the seat
positions.
Programming
1. Make sure the parking brake is on.
2. Make sure the selector lever is in the P
position.
3. Start the engine.
4. Adjust the seat and the active driving
display to the desired driving position.
5. Press the SET button on the seat until a
beep sound is heard one time.
6. Perform one of the following settings
within 5 seconds of completing step 5
above:
NOTE
If a beep sound is heard three times, the
operation is canceled.
Programming using a button on
•
the side of the seat
Press the button you want to
program, either button 1 or 2, until a
beep sound is heard one time.
Programming using the key
•
Press the key
button until a beep
sound is heard one time.
2017-5-29 10:13:38