Mazda CX-9 2018 Owner's Manual page 349

▼ Control Switches
Rear switch
Press the rear switch to operate the rear air
conditioner.
The indicator illuminates to indicate that
the rear air conditioner is operating.
AUTO switch
By pressing the AUTO switch the
following functions will be automatically
controlled in accordance with the set
temperature:
Airflow temperature
•
Amount of airflow
•
Selection of airflow mode
•
OFF switch
Pressing the OFF switch shuts off the
climate control system.
Temperature control switch
This switch controls temperature. Press
for hot and for cold.
Fan control switch
The fan has five speeds. The selected
speed will be displayed.
Mode selector switch
The desired airflow mode can be selected.
Refer to Selecting the Airflow Mode on
page 5-13.
▼ Operation of Automatic Air
Conditioner
Operation from front seats
1. Turn the front air conditioner on.
2. Press the rear switch. The rear air
conditioner operates.
CX-9_8GC3-EA-17G_Edition1
Climate Control System
3. Selection of the airflow mode, airflow
amount and temperature will be
automatically controlled to the same
temperature setting as the front air
conditioner for the driver's side.
NOTE
If the AUTO switch is pressed while
•
the front A/C switch is off, the rear
air conditioner operates only to
circulate air.
Setting the temperature to the
•
maximum high or low will not
provide the desired temperature at a
faster rate.
When selecting heat, the system will
•
restrict airflow until it has warmed
to prevent cold air from blowing out
of the vents.
When the rear air conditioner is
•
controlled to the same temperature
setting as the front air conditioner
for the driver's side, "SYNC" is
displayed on the rear screen.
Operation from rear seats
1. Turn the front air conditioner on.
2. Press the AUTO switch. The selection
of the airflow mode and airflow
amount will be automatically
controlled.
3. Use the temperature control switch to
set the desired temperature.
Interior Features
5-15
2017-5-29 10:13:38