Mazda CX-9 2018 Owner's Manual page 110

Before Driving
Doors and Locks
5. Three seconds after the function
setting has been changed, a beep sound
will beep in the amount of the selected
function number. (Ex. Function
number 3 = 3 beep sounds)
Current Function Number
Press unlock side of
lock switch once
Function Number 1
Press lock side of
Press 2 times
lock switch
Function Number 2
Press 3 times
Function Number 3
Wait for 3 second
Press 4 times
Function Number 4
Press 5 times
Function Number 5
Press 6 times
Function Number 6
Press 7 times
Cancel setting
NOTE
The doors and the liftgate cannot be
•
locked or unlocked while the setting
function is being performed.
The procedure can be cancelled by
•
pressing the lock side of the driver's
door-lock switch.
3-20
CX-9_8GC3-EA-17G_Edition1
Cancel setting
Function set (The
number of beeps
heard is the same as
the selected function
number)
▼ Locking, Unlocking with Door-Lock
Knob
Operation from inside
To lock any door from the inside, press the
door-lock knob.
To unlock, pull it outward.
This does not operate the other door locks.
Unlocked: Red indicator
Lock
Unlock
Operation from outside
To lock any door with the door-lock knob
from the outside, press the door-lock knob
to the lock position and close the door
(holding the door handle in the open
position is not required).
This does not operate the other door locks.
Door-lock knob
2017-5-29 10:13:38