Mazda CX-9 2018 Owner's Manual page 21

To move the driving position to a
programmed position
(Using a button on the side of the seat)
1. Make sure the parking brake is on.
2. Make sure the selector lever is in the P
position.
3. Start the engine.
4. Press the programming button for the
driving position you want to call up
(button 1 or 2).
5. A beep sound is heard when the
driving position adjustment is
completed.
NOTE
If the driving position movement is not
•
changed, only the beep sounds.
A seat position can be called up even
•
with the engine not running.
The driving position adjustment is
•
canceled in the following cases:
Any of the seat adjustment switches is
•
operated.
The SET button is pressed.
•
Programming button 1 or 2 is pressed.
•
The key button or
•
operated.
The vehicle starts moving.
•
The active driving display is adjusted.
•
CX-9_8GC3-EA-17G_Edition1
(Using a programmed key)
1. Unlock the doors by pressing a request
2. After unlocking the doors, the seat
3. Make sure the parking brake is on.
4. Make sure the selector lever is in the P
5. Start the engine.
6. The active driving display adjustment
NOTE
button is
Essential Safety Equipment
switch or the key button.
position adjustment begins within 40
seconds of opening the driver's door,
and a beep sounds when the operation
is finished.
position.
begins.
If there is no driving position movement,
•
a beep is not heard.
The driving position adjustment is
•
canceled in the following cases:
Any of the seat adjustment switches is
•
operated.
The SET button is pressed.
•
Programming button 1 or 2 is pressed.
•
The key button or
•
operated.
The vehicle starts moving.
•
The active driving display is adjusted.
•
Seats
button is
2-9
2017-5-29 10:13:38