Mazda BT-50 2017 Owner's Manual page 83

Table of Contents

Advertisement

Powertrain warning lamp
All vehicles
If either lamp illuminates when the engine
is running, this indicates a fault. The
engine will continue to run but it may
have limited power. If it flashes when you
are driving, reduce the speed of your
vehicle immediately. If it continues to
flash, avoid heavy acceleration or
deceleration. Have the system checked by
a properly trained technician immediately.
WARNING
Have this checked immediately.
If both lamps illuminate together, stop
your vehicle as soon as it is safe to do so
(continued use may cause reduced power
and cause the engine to stop). Turn the
ignition off and attempt to restart the
engine. If the engine restarts have the
system checked by a properly trained
technician immediately. If the engine does
not restart the vehicle must be checked
before continuing your journey.
Instrument Cluster
qFour-wheel drive indicator
The four-wheel drive indicator lamp will
come on when the transfer shift switch is
in the 4H or 4L position. This will flash
while engaging to 4H or 4L. See
Electronic Locking Differential (page
125).
qFour-wheel drive low (4L) indicator
The four-wheel drive low (4L) indicator
lamp will come on when the transfer shift
switch is in 4L position. It will flash while
engaging to 4L position. See Electronic
Locking Differential (page 125).
í
í
Some models.
í
77

Advertisement

Table of Contents
loading

Table of Contents