Windscreen Washers - Mazda BT-50 2017 Owner's Manual

If you switch autowipers on, the wipers
will not cycle until water is detected on
the windscreen. The rain sensor will then
continuously measure the amount of water
on the windscreen and adjust the speed of
the wipers automatically.
Adjust the sensitivity of the rain sensor by
turning switch on the wiper lever. With
low sensitivity, the wipers will operate
when the sensor detects a lot of water on
the windscreen. With high sensitivity, the
wipers will operate if the sensor detects a
small amount of water on the windscreen.
Wipers and Washers

WINDSCREEN WASHERS

CAUTION
Operating this function with the engine
off will drain the battery.
WARNING
Do not operate the windscreen
washers for more than 10 seconds or
when the reservoir is empty.
51