Voice Control; Principle Of Operation - Mazda BT-50 2017 Owner's Manual

PRINCIPLE OF
OPERATION
CAUTION
Using the system with the engine off
will drain the battery.
Voice recognition enables operation of the
system without the need to divert your
attention from the road ahead in order to
change settings, or receive feedback from
the system.
Whenever you issue one of the defined
commands with the system active, the
voice recognition system converts your
command into a control signal for the
system. Your inputs take the form of
dialogues or commands. You are guided
through these dialogues by
announcements or questions.
Please familiarise yourself with the
functions of the system before using voice
recognition.
qSupported commands
The voice control system allows you to
control the following vehicle functions:
Bluetooth® phone
l
radio
l
CD Player
l
external device (USB)
l
external device (iPod)
l
external device (Bluetooth® audio)
l
automatic air-conditioning
l
í
qSystem response
As you work through a voice session the
system will prompt you with a beep tone
each time the system is ready to proceed.
Do not try to give any commands until the
beep tone has been heard. The voice
control system will repeat each spoken
command back to you.
If you are not sure how to continue say
"HELP" for assistance or "CANCEL" if
you do not wish to continue.
Say "Back" to perform the operation from
the beginning again.
The "HELP" function provides only a
subset of the available voice commands.
Detailed explanations of all possible voice
commands can be found on the following
pages.
qVoice commands
All voice commands should be given
using a natural speaking voice, as if
speaking to a passenger or on the phone.
Your voice level should be dependant on
the surrounding noise level inside or
outside the vehicle but do not shout.

Voice control

í
269
Some models.