Table of Contents
Advertisement
Alarm
qTriggering the alarm
Once armed, the alarm is triggered in any
of the following ways:
If someone opens a door or the bonnet
l
without a valid key or remote control.
If someone removes the multi function
l
display.
If you switch the ignition on without a
l
valid key.
If the interior sensors detect movement
l
within the vehicle.
On vehicles with a battery back-up
l
sounder, if someone disconnects the
vehicle battery or the battery back-up
sounder itself.
If the alarm is triggered, the alarm horn
will sound for 30 seconds and the hazard
warning flasher will flash for five
minutes.
Any further attempts to perform one of
the above will trigger the alarm again.
qFull and Reduced Guard
Full Guard
Full guard is the standard setting.
In full guard, the interior sensors are on
when you arm the alarm.
NOTE
This may result in false alarms if
animals or moving objects are inside
your vehicle.
í
46
Some models.
Reduced Guard
NOTE
To switch this feature on or off, see an
Authorised Mazda Repairer.
In reduced guard, the interior sensors are
off when you arm the alarm.
NOTE
Reduced guard is available only on
vehicles with remote central locking.
Selecting Full or Reduced Guard
Locking the doors with the key will
activate reduced guard.
To deactivate reduced guard, unlock the
doors with the key or remote control.
To activate full guard, lock the doors with
the remote control.
NOTE
í
You can set the alarm to reduced guard
for the current locking cycle only. The
alarm will reset to full guard the next
time you unlock and then relock the
vehicle with the remote control.
Advertisement
Table of Contents
