Table of Contents
Advertisement
Lighting
qHeadlights high and low beam
CAUTION
Do not touch the glass of the bulb.
l
Ensure bulb is correctly seated
l
before replacing the spring clip.
Checking the bulb location through
the front of the headlamp lens can be
a useful aid to ensuring the bulb is
correctly aligned.
1. Open the bonnet. See Opening and
Closing the Bonnet (page 169).
2. Disconnect the electrical connector by
pressing in the spring releases on both
sides of the connector.
3. Remove the rubber boot.
4. Release the bulb retaining spring clip
and remove the bulb.
5. Insert the replacement bulb and retain it
using the spring clip.
NOTE
Ensure that the rubber boot seals
correctly against the bulb and headlight
housing and that it is not out of shape
while installing.
60
qSide lamps and front direction
indicators
Side lamp
1. Remove the bulb.
Front direction indicator
1
1
3
2
4
Advertisement
Table of Contents
