Mazda BT-50 2017 Owner's Manual page 100

Air-Conditioning
qTemperature control
You can set the temperature between
16 °C (61 °F) and 28 °C (82 °F) in steps
of 0.5 °C (1 °F). In position LO (below
16 °C (61 °F) the system will switch to
permanent cooling, in HI (above 28 °C
(82 °F) to permanent heating, and not
regulate a stable temperature.
Interconnection Mode
In Interconnection mode the temperature
settings for both the driver's and
passenger's side are linked. If you adjust
the temperature by turning switch on the
wiper lever on the driver's side, the
settings will be adjusted to the same
setting on the passenger's side.
To switch individual operation mode on
NOTE
Adjusting the blower speed will put the
system into individual operation mode.
94
Long press of the AUTO button or
selecting the temperature for the
passenger s side with the rotary control on
the passenger s side. The temperature for
the driver s side will remain unchanged.
You can now adjust the driver and
passenger side temperatures
independently. The temperature settings
for each side are shown in the display.
You can set a temperature difference of up
to 4 °C (8 °F).
NOTE
If you set a temperature difference of
greater than 4 °C (8 °F), the
temperature on the other side will be
adjusted so that the difference remains
4 °C (8 °F).
To switch individual operation mode off
Press the AUTO button for three seconds
or select HI or LO on the driver's side.
The passenger's side temperature will be
adjusted to the driver's side temperature.
qRecirculated air
Press the recirculated air button to toggle
between fresh air and recirculated air.