Table of Contents
Advertisement
Wheels and Tyres
Carrying Out the System Reset
Procedure
1. Check the tyre pressures and inflate all
the tyres to the correct pressure.
2. Press and hold the tyre pressure
monitor reset switch for 3 seconds. The
warning indicator blinks 3 times to
acknowledge the reset procedure was
successful.
If a flat tyre is still present after you
perform the tyre pressure monitor reset
procedure, the warning indicator remains
illuminated in the instrument cluster.
Make sure all of your tyres are inflated to
the correct pressure before performing the
reset procedure.
Type Approvals
For details on Tyre Pressure Monitoring
Sensor Radio Frequency Compliance,
refer to TYPE APPROVALS (page 304).
208
Advertisement
Table of Contents
