Configuring Bandwidth Remaining - Cisco ASR 9000 Series Configuration Manual

Configuring Modular QoS Congestion Management

Configuring Bandwidth Remaining

SUMMARY STEPS
1. configure
2. policy-map policy-name
3. class class-name
4. bandwidth remaining percent percentage-value
5. exit
6. class class-name
7. bandwidth remaining percent percentage-value
8. exit
9. class class-name
10. bandwidth remaining percent percentage-value
11. exit
12. exit
13. interface type interface-path-id
14. service-policy {input | output} policy-map
15. end or commit
16. show policy-map interface type interface-path-id [input | output]
DETAILED STEPS
Command or Action
Step 1 configure
Example:
RP/0/RSP0/CPU0:router# configure
Step 2 policy-map policy-name
Example:
RP/0/RSP0/CPU0:router(config)# policy-map
policy1
Step 3 class class-name
Example:
RP/0/RSP0/CPU0:router(config-pmap)# class
class1
Cisco ASR 9000 Series Aggregation Services Router Modular Quality of Service Configuration Guide, Release 6.1.x
Configuring Guaranteed and Remaining Bandwidths
Purpose
Enters global configuration mode.
Enters policy map configuration mode.
• Creates or modifies a policy map that can be attached to
one or more interfaces to specify a service policy.
Specifies the name of the class whose policy you want to create
or change.
75