Qos Policy Propagation Using Bgp: Examples - Cisco ASR 9000 Series Configuration Manual

Configuring Modular QoS Service Packet Classification

QoS Policy Propagation using BGP: Examples

These are the IPv4 and IPv6 QPPB examples:
Applying Route Policy: Example
In this example, BGP is being configured for the IPv4 address family:
router bgp 100
bgp router-id 19.19.19.19
address-family ipv4 unicast
table-policy qppbv4_dest
!
neighbor 10.10.10.10
remote-as 8000
address-family ipv4 unicast
route-policy pass-all in
route-policy pass-all out
In this example, BGP is being configured for the IPv6 address family:
router bgp 100
bgp router-id 19.19.19.19
address-family ipv6 unicast
table-policy qppbv6_dest
!
neighbor 1906:255::2
remote-as 8000
address-family ipv6 unicast
route-policy pass-all in
route-policy pass-all out
Applying QPPB on a Specific Interface: Example
This example shows applying QPPBv4 (address-family IPv4) for a desired interface:
config
interface POS0/0/0/0
ipv4 address 10.1.1.1
ipv4 bgp policy propagation input qos-group destination
end
commit
!
This example shows applying QPPBv6 (address-family IPv6) for a desired interface:
config
interface POS0/0/0/0
ipv6 address 1906:255::1/64
ipv6 bgp policy propagation input qos-group destination
end
commit
!
Applying QPPB on a GRE Tunnel Interface: Example
This example shows applying QPPBv4 (address-family IPv4) for a GRE tunnel interface:
config
interface tunnel-ip 4000
ipv4 address 10.1.1.1
ipv4 bgp policy propagation input qos-group destination
tunnel source TenGigE0/2/0/1
Cisco ASR 9000 Series Aggregation Services Router Modular Quality of Service Configuration Guide, Release 6.1.x
QoS Policy Propagation using BGP: Examples
175