Attaching A Shared Policy Instance To Bundle Interfaces Or Efp Bundles - Cisco ASR 9000 Series Configuration Manual

Attaching a Traffic Policy to an Interface
DETAILED STEPS
Command or Action
Step 1
configure
Step 2 interface type interface-path-id
Example:
RP/0/RSP0/CPU0:router(config)# interface
gigabitethernet 0/1/0/0.1
Step 3 service-policy {input | output} policy-map
[shared-policy-instance instance-name]
Example:
RP/0/RSP0/CPU0:router(config-if)# service-policy
output policy1 shared-policy-instance Customer1
Step 4
commit
Step 5 show policy-map shared-policy-instance instance-name
[input | output] location rack/slot/module
Example:
RP/0/RSP0/CPU0:router# show policy-map
shared-policy-instance Customer1 location 0/1/0/7.1

Attaching a Shared Policy Instance to Bundle Interfaces or EFP Bundles

After the traffic class and traffic policy are created, you can optionally use the service-policy (interface)
configuration command to attach a shared policy instance to bundle interfaces and to bundle EFPs, and to
specify the direction in which the policy should be applied (either on packets coming into or leaving the
subinterface).
For additional commands that can be entered in policy map class configuration mode, see the
Cisco ASR 9000 Series Aggregation Services Router Modular Quality of Service Command Reference.
Prerequisites
A traffic class and traffic policy must be created before attaching a shared policy instance to bundle interfaces
or EFP bundles.
Restrictions
Shared policy instance across multiple physical interfaces is not supported.
Cisco ASR 9000 Series Aggregation Services Router Modular Quality of Service Configuration Guide, Release
6.1.x
142
Configuring Modular QoS Service Packet Classification
Purpose
Enters interface configuration mode and configures
a subinterface.
Attaches a policy map to an input or output
subinterface to be used as the service policy for that
subinterface.
• In this example, the traffic policy evaluates all
traffic leaving that interface.
(Optional) Displays statistics for the policy on the
specified shared policy instance subinterface.